Volvo VNM Manuel de l'opérateur Page 294

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 389
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 293
Engine Start and Operation 287
Disengaging
The cruise control is disengaged if the
brake or clutch pedal is depressed, or if the
cruise control switch is set to OFF. If the
ignition key is turned back to the accessories
position (I), the cruise control system will
automatically be disengaged.
Resuming Vehicle Speed
The previously selected cruise speed is
retained in the memory. When the cruise
control switch is pushed to the RESUME
position, the vehicle resumes the previously
set speed (provided vehicle speed exceeds
approximately 10 mph (15 km/h) when the
switch is pressed).
Acceleration
Momentary acceleration (such as for passing
another vehicle) does not interrupt cruise
control operation. After passing, release
accelerator and let the vehicle slow to cruise
control speed. The previously set speed will
then be maintained without having to set the
switch to RESUME.
CAUTION
On vehicles equipped with Eaton VORAD
SmartCruise, cruise control is disengaged
in the event the SmartCruise system fails
to operate. You must stop the truck,
turn the ignition off and on, and activate
the control twice in order for the cruise
control to operate.
Note: Read the Eaton VORAD Collision
Warning System Driver Reference Manual
before taking a vehicle equipped with
VORAD out on the road.
Vue de la page 293
1 2 ... 289 290 291 292 293 294 295 296 297 298 299 ... 388 389

Commentaires sur ces manuels

Pas de commentaire