07 Wheels and tyres
Warning triangle* and spare wheel*
07
``
* Option/accessory, for more information, see Introduction.
181
Warning triangle
Follow the regulations in force for the use of a
warning triangle*. Place the warning triangle in
a suitable place with regard to the traffic.
1. Undo the case containing the warning tri-
angle, it is secured with Velcro straps. Take
the warning triangle from the case.
2. Lower the warning triangle's support legs.
Ensure the warning triangle and its case are
firmly secured in the cargo area after use.
Spare wheel* and jack*
The car's original jack*
The original jack must only be used for chang-
ing wheels. The jack's thread should always be
well greased. The spare wheel* plus jack* and
wheel wrench* are stored under the floor in the
cargo area.
NOTE
Volvo recommends only using the jack* that
belongs to the car model in question.
Taking out the spare wheel
1. Fold the rear edge of the floor mat forward.
2. Release the spare wheel and lift it out.
3. Take out the jack* plus crank and the wheel
wrench*.
Putting the spare wheel* and jack* into
the cargo area
1. Crank the jack (3) to halfway in order that
the jack shall fit horizontally in the bracket.
2. Fold in the handle (6) and place the wheel
wrench (2) on the jack.
Commentaires sur ces manuels