Volvo PENTA Manuel de service télécharger pdf (Page 105)

102

Repair instructions

17. Remove the forward gear bearing outer race from

the lower unit, using special tool 884794 and slide

hammer 884161. Remove the shims from the housing.

NOTE! Be careful not to damage the shims! Save

them for use later.

18. Use special tool 885226 with handle 884143. Drive

the needle bearing from the lower unit gear housing.

Inner propeller shaft

19. Press off the roller bearing from the propeller

shaft, using special tool 884797.

NOTE! Take care of the shims.

Outer propeller shaft

20. Insert the shaft in special tool 884831. Install pull-

er halves between the shaft and the special tool. In-

stall special tool 884789 on the shaft to protect the

shaft during pressing operations. Press off the bearing

race.

WARNING!

Do not use a knife puller or other,

similar tool to remove this bearing race. Such

tools may scratch the sealing surfaces of the

shaft (1) and result in water leaking into the

sterndrive.

16. Remove the pinion gear and the front gear from

the lower unit housing. The forward gear should be

free to remove from the housing with the forward bear-

ing attached to the gear.

884794

884161

885226

884143

884797

884831

884789

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 180 181

Pas de commentaire

Volvo PENTA Manuel de service Page 105